How Do You Protect a Vacant Home From Water Damage?
Last updated October 31, 2026
The short answer
Shut off the Water Supply
The single most effective step is to turn off the main water shutoff valve before you leave. This stops most leaks from burst pipes, faulty appliances, or loose fittings. Make sure everyone who might enter the home knows where that valve is located. Write the location down and leave it in a visible spot, such as on the inside of the front door or near the electrical panel.
After shutting off the water, drain the pipes by opening the lowest faucet in the house and letting the water run out. Then open all other faucets briefly to release remaining water. Flush toilets to empty the tanks. If you live in Louisville, keep your shutoff valve location written down and stored in your phone or with a trusted neighbor.
Maintain Heat and Ventilation
Keep the home heated to at least 55 degrees Fahrenheit, even in mild weather. This prevents pipes from freezing and cracking. If you cannot maintain heat, drain the entire plumbing system completely and add antifreeze to toilets and drains, following the product's instructions. Never leave the heat off without draining, as trapped water can freeze and expand.
Ventilation is just as important. Stagnant air can lead to condensation, musty odors, and mold growth. Open a few windows slightly if the weather is dry, or use a dehumidifier set to run continuously. Make sure the dehumidifier drains into a sink or floor drain, not a bucket that can overflow. A neighbor or the pros can check on the home weekly to adjust settings.
- Turn off the main water valve
- Drain all pipes and toilets
- Keep heat at 55 degrees or higher
- Open vents or run a dehumidifier
- Inspect roof and gutters before leaving
- Ask a neighbor to check weekly
Inspect the Exterior and Roof
Before leaving, walk around the home and look at the roof, gutters, and downspouts. Remove leaves and debris so rainwater can flow away from the house. Check for missing shingles, cracked flashing, or damaged seals around chimneys and vents. Even a small gap can allow water to seep in during a storm.
Trim tree branches that hang over the roof, as they can break and cause damage. Ensure the ground slopes away from the foundation so water does not pool. If you have a basement or crawlspace, check for cracks in the walls or floor and seal them with a waterproofing product. A water damage inspection can catch hidden issues before they become major problems.
- Clean gutters and downspouts
- Look for missing or damaged shingles
- Seal cracks in the basement or crawlspace
- Trim overhanging branches
- Check seals around windows and doors
Protect Interior Surfaces
Move furniture and valuables away from exterior walls and off the floor, especially in basements or first-floor rooms. Elevate items on blocks or shelving so they stay dry if minor flooding occurs. Remove area rugs and store them rolled up in a dry place. Hang curtains and drapes so they do not touch the floor.
Consider installing water sensors near the water heater, washing machine, and sump pump. These battery-powered devices can send an alert to your phone if they detect moisture. Some models can even shut off the water supply automatically. Even with sensors, ask a neighbor to check the interior every few days to catch problems early.
Plan for Long Vacancies
For extended absences, consider having a plumber install an automatic shutoff valve that detects leaks. This device monitors water flow and stops it if a pipe bursts. It is a practical investment for anyone who leaves home for months at a time. Keep the water heater set to vacation mode or turn it off and drain it.
If you return to find water damage, act quickly. Remove standing water and dry affected areas within 48 hours to reduce mold growth. Contact the pros for a thorough inspection and cleanup. They can handle drywall repair, stain removal, and crawlspace cleanup. Policies vary, and your insurer decides what is covered.
Talk to someone now
Call (502) 305-4876 any time, day or night, and describe what happened.
Call Now (502) 305-4876Frequently asked questions
Should I leave the heat on in a vacant home?
Yes, keep the heat at 55 degrees or higher to prevent pipes from freezing. If you cannot maintain heat, drain the entire plumbing system and add antifreeze to drains. A frozen pipe can burst and cause extensive water damage.
How often should someone check the vacant home?
Ask a neighbor or friend to check at least once a week. More frequent checks are better during heavy rain or freezing weather. They can spot leaks, broken windows, or roof damage early. Consider installing water sensors for real-time alerts.
What should I do if I find water damage upon return?
Act within 48 hours to dry the area and prevent mold. Remove standing water, use fans and dehumidifiers, and discard soaked materials. Contact local water damage pros for a full inspection and restoration, including drywall, carpet, or ceiling repairs.
More questions and answers
- Why Does a Clogged Condensate Line Cause Water Damage?
- How Does Water Damage Affect Home Resale Value?
- What Is Class 4 Water Damage and Is It Serious?
- Why Does Water Damage Lower a Home's Appraisal?
- Why Does Water Damage Restoration Need Documentation?
- How Does Gray Water Damage Differ From Black Water Damage?
- All articles