The short answer
Start with a Careful Inspection
Before you apply anything, look at the chimney from top to bottom. Check the flashing where the chimney meets the roof, the mortar joints between bricks, and the concrete crown at the top. Cracks, loose flashing, or deteriorated mortar let water in, and sealing over them will not hold.
Use a ladder safely or inspect from a window if you can reach. You are looking for any gap wider than a hairline crack, rusted flashing, or spalling brick. If you spot serious structural issues, a roofer or mason should handle repairs before waterproofing begins.
Clean and Prepare the Surface
Dirt, moss, and old sealant prevent waterproofing products from bonding. Scrub the brick and mortar with a stiff brush and a mild cleaner, then rinse thoroughly. Let the chimney dry completely, because applying a water repellent to wet masonry traps moisture inside.
For stubborn efflorescence or mineral deposits, a masonry cleaner can help. Avoid pressure washing at high pressure, which can force water deeper into the brick. Work on a dry day with mild temperatures so the product cures properly.
- Inspect flashing and mortar joints
- Repair cracks with masonry patching compound
- Clean brick and mortar thoroughly
- Let the surface dry for at least 24 hours
- Apply a breathable water repellent
- Re-seal the crown with flexible sealant
Apply a Breathable Water Repellent
A breathable water repellent is the key product for waterproofing brick and mortar. It soaks into the masonry and repels liquid water while still letting moisture vapor escape. Silane or siloxane based products work well and are available at most hardware stores.
Apply the repellent with a brush, roller, or low-pressure sprayer, covering every surface evenly. One coat is often enough, but two thin coats may be better on very porous brick. Follow the product instructions for coverage and drying time.
Seal the Crown and Flashing
The crown, the concrete cap at the top of the chimney, is the first line of defense. Cracks in the crown let water run directly into the brick core. Clean the crown, fill cracks with a masonry caulk, and apply a flexible sealant over the entire surface.
Flashing, the metal strips where the chimney meets the roof, must be tight and sealed. If the flashing is loose or rusted, replace it or have a roofer do the job. Properly installed flashing directs water away and prevents leaks at the roofline.
Know When to Call the Pros
Waterproofing works properly on a chimney that is already sound. If you see water stains on interior walls, damp insulation, or rotting wood near the chimney, you likely have an active leak. In that case, sealants alone will not solve the problem.
Local water damage pros can inspect the chimney and the surrounding structure, identify hidden moisture, and dry out affected areas. If water has already damaged drywall or framing, you may need structural drying and repair. Your insurance policy may help, but policies vary, and your insurer decides what is covered.
Water damage does not wait
Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.
Call Now (502) 305-4876Frequently asked questions
Can I waterproof a chimney myself?
You can apply a breathable water repellent and seal minor cracks yourself if the chimney is in good shape. For major cracks, flashing issues, or interior water damage, you need a professional. Inspecting safely from the ground or a stable ladder is fine, but roof work is risky.
How often should I reapply waterproofing?
Most masonry water repellents last five to ten years, but exposure to harsh weather can shorten that. Check the chimney each spring and fall for cracks or peeling sealant. Reapply the repellent when water stops beading on the surface, or after any major storm damage.
What if water damage is already visible inside?
If you see stains, peeling paint, or a musty smell near the chimney, the leak is active. Stop using the fireplace until the issue is fixed. Call the pros to inspect and dry the area, and address the chimney repair before waterproofing again. Your insurance policy may help, but policies vary.
More questions and answers
- How Do Chimney Caps Prevent Water Damage?
- How Does a Leaky Chimney Cause Interior Water Damage?
- What Is Chimney Crown Damage and Why Does It Matter?
- Why Does Rain Enter Through a Chimney?
- What Is Efflorescence on a Chimney and Is It Serious?
- Why Does Chimney Flashing Fail and Cause Leaks?
- All articles